A correlation between the variable melt flow index and the molecular mass distribution of virgin and recycled polypropylene used in the manufacturing of battery cases

This study looked at establishing a correlation between the variable melt flow index (VMFI) values of molten polypropylene (PP) with different piston-load masses using a standard MFI analyser. The study was done using virgin PP and recycled PP obtained from recycling Pb-acid batteries. The study showed that the results would fit a suitable power function equation where the size of the exponent reflects the increase in flow characteristics of the polymer with increased piston-load mass. The established correlation was then compared to the average molecular weight distribution of virgin PP determined by gel permeation chromatography (GPC). Good agreement was obtained for the range of grades of virgin PP samples that correlated well with the Mark-Houwink power law where the inverse of the MFI (1/MFI) would be proportional to the average molecular weight to the power of 3.4 (Mw^3.4). GPC analysis cannot be effectively used to study recycled PP, where a number of factors can influence the melt flow properties such as fillers, impurities and the presence of polyethylene in the polymer matrix. Instead, a comparative understanding of the flow behaviour of recycled PP to that of virgin PP was done by using the VMFI method to possibly show the dissimilar polymer melt flow behaviour of using virgin and recycled PP material in injection moulding of new battery cases and lids, or when attempting to seal the lid to the battery case during manufacturing.     

超高效液相色谱-串联质谱法测定玉米中硝磺草酮及其代谢物残留量

建立了超高效液相色谱-串联质谱法测定玉米中硝磺草酮及其代谢物(MNBA)的残留分析方法。样品用乙腈-水溶液提取,取适量提取液用甲酸酸化至pH 2,过HLB固相萃取柱进行净化,用甲醇-乙醚(70∶30,V/V)洗脱,洗脱液用氮气吹至近干,用1 mmol/L醋酸铵-乙腈(25∶75,V/V)定容后进行质谱分析,利用基质校正曲线对其准确定量。硝磺草酮和MNBA在1～200μg/L浓度范围内呈线性关系,相关系数均大于0.99,在添加浓度5～50μg/kg范围内,硝磺草酮及其代谢物MNBA的平均回收率为83.8%～101.1%,相对标准偏差在5.3%～12.8%之间,硝磺草酮和代谢物MNBA定量限分别为1.0和2.0μg/kg。     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

Determination of Diuretics in Urine Using Immobilized Multi‐Walled Carbon Nanotubes in Hollow Fiber Liquid‐Phase Microextraction Combined with Liquid Chromatography‐Tandem Mass Spectrometry

A novel technique utilizing the adsorptive potential of immobilized multi‐walled carbon nanotubes (I‐MWCNT) in hollow fiber liquid‐phase microextraction (HF‐LPME) was developed for the determination of diuretics in urine. In this study, the potential of carbon nanotubes as a sorbent for three‐phase liquid‐phase microextraction of diuretics from urine samples was evaluated. Analysis was performed using liquid chromatography‐tandem mass spectrometry (LC‐MS/MS). A novel method was applied to detect acetazolamide (AAA), chlorothiazide (CTA), hydrochlorothiazide (HCT), hydroflumethiazide (HFT), clopamide (CA), trichlormethiazide (TCM), althiazide (AT) and bendroflumethiazide (BFT) in urine. Two‐step extractions using different times and temperatures for each step were adopted. Parameters influencing the extraction efficiency, including the extraction solvent, sample pH, salt concentration, extraction time and extraction temperature were systematically optimized. Under the resulting optimal extraction conditions, this method showed good linearity over an analytes concentration range of 1 to 1000 ng/mL, high extraction repeatability with relative standard deviations of less than 6%, and low detection limits (0.09 to 0.51 ng/mL). The application of the methods to the determination of diuretics in real samples was tested by analyzing urine samples of patient.     

三电极共面介质阻挡放电的放电特性及诱导气流实验研究

等离子体流动控制激励器由于其响应速度快、激励频带宽、能量损耗低、可靠性强的优势,在航空航天领域的主动流动控制等方面得到了广泛应用.文章提出了一种新型的等离子体气动激励器——三电极共面介质阻挡放电激励器,研究了该激励器电极结构对放电特性和诱导气流速度的影响,并与传统共面介质阻挡放电和沿面介质阻挡放电激励器进行了比较.结果表明:（1）随着激励电压的提高,高压电极和地电极之间先出现了丝状放电并逐渐延伸到第三电极;（2）随着第三电极与高压电极之间的距离增大,诱导气流速率从2.4 m/s下降到0 m/s,而第三电极宽度的变动对诱导气流速度影响可忽略不计;（3）相同外部条件下,该激励器诱导的气流速度小于沿面介质阻挡放电激励器,但高于共面介质阻挡放电激励器.      

高频感应等离子体流动模型与微型电推进器流场特性分析

微型射频离子推力器具有结构简单、工作寿命长、推力动态范围大、性能调节响应灵敏等特点,是国际微电推进领域的研究热点之一.射频离子推力器电离室内的感性耦合放电等离子体特性和推力器的性能密切相关.为此,文章建立了低气压、小尺寸微型射频离子推力器电离室内感性耦合等离子体流体模型,开展了电磁场、流场、化学反应浓度场的多物理场耦合仿真分析,并研究了等离子体放电特征参数随推进剂工质气压、放电吸收功率、射频频率以及线圈匝数等因素的变化规律.结果表明,推进剂工质气压、放电吸收功率是调节微型射频离子推力器性能的主要因素,该研究为综合调控微型射频离子推力器的工作性能奠定了良好的基础.      

标准有限元方法模拟大气压流注等离子体中数值振荡与伪扩散问题研究与改进

基于商用软件的等离子体数值模拟方案大多是基于标准Galerkin格式的有限元方法,在计算大气压流注放电时,存在数值振荡和伪扩散的问题,计算结果可靠性不高.针对针-板体流注放电结构,构建了修正的COMSOL Multiphysics等离子体模型.修正模型与COMSOL Multiphysics内置等离子体模块的区别主要在于增加了基于弱形式的人工稳定项.利用修正模型复现了经典的雪崩-流注转捩算例,并与经典纳秒秒冲过电压针板放电实验结果进行了对比验证.结果表明,引入修正后的商用软件模型能够克服数值振荡和伪扩散缺陷,确保等离子体数值计算的准确性和可复现性.      

The AME 2020 atomic mass evaluation (I). Evaluation of input data,and adjustment procedures

This is the first of two articles(Part I and Part II)that presents the results of the new atomic mass evaluation,Ame2020.It includes complete information on the experimental input data that were used to derive the tables of recommended values which are given in Part II.This article describes the evaluation philosophy and procedures that were implemented in the selection of specific nuclear reaction,decay and mass-spectrometric data which were used in a least-squares fit adjustment in order to determine the recommended mass values and their uncertainties.All input data,including both the accepted and rejected ones,are tabulated and compared with the adjusted values obtained from the least-squares fit analysis.Differences with the previous Ame2016 evaluation are discussed and specific examples are presented for several nuclides that may be of interest to Ame users.     

Fission fragment mass yields of Th to Rf even-even nuclei

Fission properties of the actinide nuclei are deduced from theoretical analysis. We investigate potential energy surfaces and fission barriers and predict the fission fragment mass yields of actinide isotopes. The results are compared with experimental data where available. The calculations were performed in the macroscopic-microscopic approximation with the Lublin-Strasbourg Drop (LSD) for the macroscopic part, and the microscopic energy corrections were evaluated in the Yukawa-folded potential. The Fourier nuclear shape parametrization is used to describe the nuclear shape, including the non-axial degree of freedom. The fission fragment mass yields of the nuclei considered are evaluated within a 3D collective model using the Born-Oppenheimer approximation.     

Bayesian inference on isospin splitting of nucleon effective mass from giant resonances in ~(208)Pb

From a Bayesian analysis of the electric dipole polarizability,the constrained energy of isovector giant dipole resonance,the peak energy of isocalar giant quadrupole resonance,and the constrained energy of isocalar giant monopole resonance in ~(208)Pb,we extract the iso scalar and isovector effective masses in nuclear matter at saturation density p_0 as m_(s,0)~*/m=0.87_(-0.04)~(+0.04) and m_(v,0)~*/m=0.78_(-0.05)~(+0.06),respectively,at 90% confidence level.The constraints obtained on m_(s,0)~* and m_(v,0)~* lead to a positive iso spin splitting of nucleon effective mass in asymmetric nuclear matter of iso spin asymmetry δ at p_0 as m_(n-p)~*/m=(0.20_(-0.14)~(+0.15))δ.In addition,the symmetry energy at the subsaturation density p~*=0.05 fm~(-3) is determined to be E_(sym)(p~*)=16.7±1.3 MeV at 90% confidence level.